Dental Education
Online Dental Education Dental education lectures and videos Online dental ce Dental education articles Expert dental educators Dental products education Dental Community
 
Video Details
Controlled Ridge Splitting (CRS)

Description:
To demonstrate a new technique of controlled ridge splitting (CRS) in severely atrophied maxillary cases as an alternative to autogenous block graft. Twenty cases were completed using a controlled ridge splitting (CRS) technique with a total of 65 implants were placed in severely atrophied Maxillae and followed after the implants were loaded. Results: The CRS technique was used in very complex cases, where the alternative method will be autogenous block graft. A total of 65 tapered implants were placed. The implants diameter ranged between 3.25-5mm with a length ranged between 10-13mm. The implants were restored and were followed for 1-3 years. All implants achieved osseointegration and continue to have successful prostheses. Conclusion: The CRS is a predictable treatment option and could be a good alternative to autogenous block grafts is severely atrophic maxillae.

Date Added:
4/2/2014

Author(s):

Suheil M. Boutros, DDS, MS Suheil M. Boutros, DDS, MS
Dr. Boutros is a graduate of the University of Detroit Mercy, where he earned his D.D.S. degree, and received his Master’s degree and specialty certificate in...
[read more]


Featured Products
Carestream Dental
CS 9300


Online Videos / Surgery / Bone Grafting / Controlled Ridge Splitting (CRS)




Questions & Comments
Maurice Salama - (1/10/2018 7:55 AM)

Fred; Opacious porcelain was used.

fred gareis - (1/9/2018 12:29 AM)

Yes hello I'm not sure if my question was posted so i will ask Dr.Boutros again What type of alloy & porcelain, was used in the recent article Zimmer Eztetic 3.1 to mask out the abutment,I would like to use this technique on similar cases. Thank you, best regards, fred

ward clemmons - (4/26/2014 6:47 PM)

Beautiful cases. Thanks

suheil boutros - (4/8/2014 1:58 PM)

Maurice; I try to split the flap when possible but most of the time it ends up a full thickness flap which as you indicated it might compromise blood supply? but we can still can get enough blood supply from the the the flap and bone. The minimum ridge that I was able to split base on a CT is 2.85mm which was shown in one of the cases.

suheil boutros - (4/8/2014 1:54 PM)

Kevin; You can get the kit from Karl Schumacher here in the US or Zepf in Germany.

suheil boutros - (4/8/2014 1:53 PM)

Robert, The reason why teeth were extracted was extensive decay and since the patient was involved in a car accident and due to extended hospital stay and due to insurance limitations, the teeth were extracted without any site development. If you like more detailed info about the case I will be more than happy to discuss it.

suheil boutros - (4/8/2014 1:50 PM)

Indrajeet; Concerning the denture if we are having the patient use the same denture, I would relief any pressure and do a soft reline and if possible I would have the patient hold off on using the denture for at 1-2 weeks. you can get the kit from Karl Schumacher here in the US or Zepf in Germany and the best way is to google the info.

suheil boutros - (4/8/2014 1:46 PM)

Yosef; You can get the wedges from Karl Schumacher and as far as I know they sell them separate.

suheil boutros - (4/8/2014 1:44 PM)

Ronnie; Yes I place the allograft between the split ridge and the implants as well followed by the membrane.

Related Videos
Osseous Regeneration and Soft Tissue Management: An Inseparable Binomial - Part 1 of 2 Premium Member Content

Osseous Regeneration and Soft Tissue Management: An Inseparable Binomial - Part 1 of 2
For a long time the soft and hard tissue management has been separated. In this conference series, we will present the principal factors for the attainment of results with high quality standards. This will result in long term stability for our restorations with excellent esthetic and functional outcomes.

Presented By:: Dr. Juan Alberto Fernandez Ruiz
Presentation Style: Video
Community Rating:
 
Watch Now>>
Bone Graft Cements: A New Advance to Augmentation Solutions Premium Member Content

Bone Graft Cements: A New Advance to Augmentation Solutions
The purpose of this lecture is to shed light on the evolution of raw materials in order to find the ultimate bone graft cement, exploring the potential and the new opportunities of using cement-based augmentation materials in the maxillofacial and dental fields, and emphasizing the advantages, disadvantages and methods of use from the scientific and clinical points of view.

Presented By:: Amos Yahav, DMD
Presentation Style: Video
Community Rating:
 
Watch Now>>
Managing 3D Shape and Space in Bone Augmentation: Putty Assisted Regeneration. Premium Member Content

Managing 3D Shape and Space in Bone Augmentation: Putty Assisted Regeneration.
This presentation will demonstrate the utilization of Novabone in several different applications to include ridge preservation and sinus grafting and immediate implant placement.

Presented By:: Richard Martin, DDS
Presentation Style: Lecture
Community Rating:
 
Watch Now>>
Related Courses
Controlled Ridge Splitting (CRS) Premium Member Content

Controlled Ridge Splitting (CRS)
To demonstrate a new technique of controlled ridge splitting (CRS) in severely atrophied maxillary cases as an alternative to autogenous block graft. Twenty cases were completed using a controlled ridge splitting (CRS) technique with a total of 65 implants were placed in severely atrophied Maxillae and followed after the implants were loaded. Results: The CRS technique was used in very complex cases, where the alternative method will be autogenous block graft. A total of 65 tapered implants were placed. The implants diameter ranged between 3.25-5mm with a length ranged between 10-13mm. The implants were restored and were followed for 1-3 years. All implants achieved osseointegration and continue to have successful prostheses. Conclusion: The CRS is a predictable treatment option and could be a good alternative to autogenous block grafts is severely atrophic maxillae.

Presented By:: Suheil M. Boutros, DDS, MS
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
Bone Augmentation & Bioengineering in the Clinical Implant Practice Premium Member Content

Bone Augmentation & Bioengineering in the Clinical Implant Practice
This webinar will introduce efficient and predictable bone graft solutions as well as bioactive modifiers that can be immediately incorporated into clinical practice.

Presented By:: Maurice Salama, DMD
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
Tissue Engineering and Platelet Derived Growth Factors: Evidence Based Therapy Premium Member Content

Tissue Engineering and Platelet Derived Growth Factors: Evidence Based Therapy
Platelet derived growth factors are now routinely utilized in reconstructive therapy. This presentation describes very detailed and evidence based guidelines for clinicians interested in enhancing their abilities in tissue engineering, especially as it relates to bone augmentation.

Presented By:: Joseph Choukroun, MD
Presentation Style: Online Self-Study Course
CE Hours: 1
Watch Now>>
The Use of SonicWeld® Ultrasonically Fabricated Barriers for Enhanced Outcomes in Guided Bone Regeneration Premium Member Content

The Use of SonicWeld® Ultrasonically Fabricated Barriers for Enhanced Outcomes in Guided Bone Regeneration
KLS Martin has developed a unique bioresorbable guided bone regeneration barrier which can be molded into any desired three-dimensional form. Using a combination of thermoplastic and ultrasonic energies, these barriers have been successfully used to create the proper environment for both large lateral and vertical ridge augmentations for situations previously only treated with block grafting or distraction. This course will outline the basic science, clinical techniques and outcomes of the SonicWeld technique.

Presented By:: Kevin George Murphy, DDS, MS
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
Related Articles
Socket Augmentation: Rationale and Technique

Socket Augmentation: Rationale and Technique
This article presents the rationale behind socket augmentation for future implant placement and describes a technique that has shown to not only facilitate tooth extraction with minimal damage to the surrounding anatomic structures, but also to improve alveolar bone quality and quantity.

Author(s): Hom-Lay Wang, DDS, MSD, PhD;Koichi Kiyonobu, DDS, PhD; Rodrigo F. Neiva, DDS
View Article>>
Three-Dimensional Bone and Soft Tissue Requirements for Optimizing Esthetic Results in Compromised Cases with Multiple Implants

Three-Dimensional Bone and Soft Tissue Requirements for Optimizing Esthetic Results in Compromised Cases with Multiple Implants
In this article, the concepts behind achieving esthetic and functional implant restorations and the necessary three-dimensional peri-implant hard and soft tissue management required to realize these goals are discussed.

Author(s): David Garber, DMD;Maurice Salama, DMD;Henry Salama, DMD;Akiyoshi Funato, D.D.S.;Tomohiro Ishikawa, DDS;Hajime Kitajima, DDS; Hidetada Moroi, DMD
View Article>>
Socket Gafting with the use of Autologous Bone - an Experimental Study in the Dog

Socket Gafting with the use of Autologous Bone - an Experimental Study in the Dog
In five beagle dogs, the distal roots of the third and fourth mandibular premolars were removed. The sockets in the right or the left jaw quadrant were grafted with either anorganic bovine bone or with chips of autologous bone harvested from the buccal bone plate. After 3 months of healing, biopsies of the experimental sites were sampled, prepared for buccal–lingual ground sections and examined with respect to size and composition.

Author(s): Mauricio G. Araujo; Jan Lindhe
View Article>>
Contact Us | Privacy Policy | Terms of Use
©2018

Preferred Language: English Flag
Contact Us · Login · Register