Dental Education
Online Dental Education Dental education lectures and videos Online dental ce Dental education articles Expert dental educators Dental products education Dental Community
 
Video Details
The Role of Piezo-Surgical Ridge Split Technique in the Reconstruction of Ridge Deficiencies - Part 2 of 2

Description:
In this 2nd of a series, Dr. Dan Holtzclaw demonstrates the role of piezosurgical mediated ridge split technique in the reconstruction of ridge width deficiencies in order to facilitate more optimal placement of dental implants. A number of different variations exist regarding this technique. However, in this section, Dr. Holtzclaw discusses the role of piezoelectric hinge assisted ridge split (PHARS) technique in creating a hinged ridge split that is filled with particulate allograft and covered with a barrier membrane. Specific emphasis is placed on outlining the advantages and unique challenges of the PHARS technique.

Date Added:
7/4/2011

Author(s):

Dan Holtzclaw, DDS, MS Dan Holtzclaw, DDS, MS

Dr. Holtzclaw received his dental degree (Cum Laude) from the University of Texas Health Science Center at San Antonio. During a subsequent 12 year ...
[read more]






Online Videos / Surgery / Bone Grafting / The Role of Piezo-Surgical Ridge Split Technique in the Reconstruction of Ridge Deficiencies - Part 2 of 2




Questions & Comments
Juan Uribe Saldarriaga - (3/10/2016 2:49 PM)

Very nice presentation congratulations Dr Dan, I just want to know, what are you doing now when you need to gain height and what bone regeneration procedures in vertical case you do. Thanks

henry salama - (10/10/2015 9:27 AM)

Harry, since the idea is to "split" (not just cut through) the buccal cortical plate from the palatal/lingual bone plate, we would require an intervening layer of cancellous bone. Therefore, the minimum thickness that can be "split" is likely to be about 3mm, i.e. 1mm buccal, 1mm cancellous and 1mm palatal. Also, Harry, why not post images of the CT in question on the Forum. I'm sure you will get a great deal of feedback. Good luck.

Harry Albers - (10/9/2015 4:56 PM)

What is the minimum thickness of a ride to due a ridge split technique? Can I send you a cone beam of a case? Harry Albers

byron scott - (5/26/2014 12:16 PM)

Very informative & straightforward.

Eviatar Buchman - (10/24/2011 5:32 PM)

Thank you very much for your presentation. In a case of braking the buccal wall how do you recomand to fix it. Is there any video about it. second question, what if the risk to damage the inferior nerve?

E. Buchman

dentimp huang - (7/23/2011 2:11 PM)

Great answer ! Thank you , Dr.Holtzclaw.

dan holtzclaw - (7/19/2011 5:03 PM)

Thank you for the kind comments.

To answer everyone's questions:

1) I generally will not place implants simultaneously in the mandible. The bone here is very dense, especially with a resorbed ridge. That is why I employ the apical hinge cut. This allows me to lateralize the buccal plate more extensively. With this being said, however, it also makes the area less stable for simultaneous implant placement. In the maxilla, I generally have no problem with placing implants with a ridge split (circumstances permitting)

2) I have only used PRF and have not used PRGF. They both have their supporters. It is very fun to watch Chokroun and Anitua square off against one another. I have seen great cases from both sides.

3) I have found that the ridge heals just fine with a full thickness flap. I understand the concept for a split thickness flap, but have not found it to be necessary.

dan holtzclaw - (7/19/2011 4:58 PM)

test

alessandro zussino - (7/12/2011 2:23 PM)

Thank you Dr. Holtzclaw for your very interesting lecture and for the elegant surgery I've seen. When I approach this tecnique I try to insert implants at the same time of the ridge splitting in order to save time to my patient and myself, and also considering that implants can work maintaining the space of the splitted ridge, and moreover reducing the amount of graft needed; what's your opinion about that? Also: what do you think about the tecniques that suggest a split flap incision (like the ERE tecnique of Bruschi and Scipioni)?
Thank you so much.

Related Videos
The Role of Piezo-Surgical Ridge Split Technique in the Reconstruction of Ridge Deficiencies - Part 1 of 2 Premium Member Content

The Role of Piezo-Surgical Ridge Split Technique in the Reconstruction of Ridge Deficiencies - Part 1 of 2
This 2 part lecture demonstrates the piezoelectric hinge assisted ridge split (PHARS) technique for reconstruction of ridge deficiencies to facilitate the placement of dental implants. A review of multiple ridge augmentation techniques is provided along with advantages and unique challenges of the PHARS technique.

Presented By:: Dan Holtzclaw, DDS, MS
Presentation Style: Lecture
Community Rating:
 
Watch Now>>
Hard and Soft Tissue Augmentation: Optimizing Esthetic Results for the Restorative Dentist Premium Member Content

Hard and Soft Tissue Augmentation: Optimizing Esthetic Results for the Restorative Dentist
Contemporary patient expectations have made esthetics a major requisite of all treatment plans, especially in situations where there is a high smile line. Although new restorative materials have highly improved predictability and esthetic outcomes, soft and hard tissue management play a fundamental role when working in esthetic areas. To achieve ideal esthetics, preservation of the natural soft and hard tissue architecture is a primary clinical objective. These new proposed techniques illustrate the importance of pre-prosthetic soft and hard tissue management when working in highly esthetic compromised areas.

Presented By:: Giuseppe Cicero, DDS
Presentation Style: Video
Community Rating:
 
Watch Now>>
Making Successful Clinical Decisions in Esthetic Implant Therapy - Part 2 of 3 Premium Member Content

Making Successful Clinical Decisions in Esthetic Implant Therapy - Part 2 of 3
This presentation will outline a systematic diagnostic and treatment design protocol for anterior implant supported restorations as well as how implant design, components and regenerative techniques influence the process.

Presented By:: Henry Salama, DMD
Presentation Style: Lecture
Community Rating:
 
Watch Now>>
Advanced Bone Grafting Techniques: Part 2 - Autogenous Bone Blocks in the Reconstruction of the Atrophic Maxillary Ridge Premium Member Content

Advanced Bone Grafting Techniques: Part 2 - Autogenous Bone Blocks in the Reconstruction of the Atrophic Maxillary Ridge
This lecture will describe the use of autologous onlay block bone grafting for reconstruction of moderate to severe atrophic maxillary alveolar ridge. This will include a discussion of the various options to this form of grafting, such as short implants, maxillary sinus augmentation, sub-nasal elevation procedure, connective tissue grafting and soft tissue manipulation, Le-Fort I down fracture/osteotomy and the use of progenitor cells: bone marrow aspirating concentrated.

Presented By:: Devorah Schwartz-Arad, DMD, PhD
Presentation Style: Video
Community Rating:
 
Watch Now>>
Related Courses
Combined Augmentation Therapies in the Esthetic Zone Premium Member Content

Combined Augmentation Therapies in the Esthetic Zone
The esthetic zone presents a far bigger challenge than any other area of the mouth. It is the one area that a patient has the ability to really scrutinize the work that has been done and anything that does not pass muster will quickly create problems in our practices. Uncompromising treatment planning is therefore essential to ensure the long term aesthetic stability of our esthetic cases. Treatment planning involves both bone and soft tissue therapy as both are critical for the stability. This lecture will highlife the importance of different treatment options as well as show numerous new techniques that are possible to achieve the results that both our patients and practitioners are proud of.

Presented By:: Howard Gluckman, BDS, MChD, PhD
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
Esthetic Tissue Reconstruction Around Implants - Part 1 of 2 Premium Member Content

Esthetic Tissue Reconstruction Around Implants - Part 1 of 2
Esthetics in implant-supported restorations is an important clinical objective in contemporary dentistry. Understanding the biological behavior of hard and soft tissues following tooth extraction is the first step to anticipate the physiological tissue remodeling and its consequences. Our objective in these 2 sequencial lectures was to provide straightforward decision trees related to several clinical scenarios observed in routine clinical practice. The 3 fundamental pillars for peri-implant excellence are: restorative-driven implant position, hard and soft tissue reconstruction using different biomaterials and grafts, and prosthetic management. Using this philosophical approach seems to provide esthetic and stable results over time irrespective of the initial clinical condition.

Presented By:: Robert Carvalho da Silva, DDS, PhD
Presentation Style: Online Self-Study Course
CE Hours: 1 Continuing Education Unit (CEU)
Watch Now>>
Titanium Mesh and rhBMP-2 in Ridge Augmentation: Options and Limitations Premium Member Content

Titanium Mesh and rhBMP-2 in Ridge Augmentation: Options and Limitations
Titanium mesh has been used in reconstructive surgery and ridge augmentation for several years. The traditional technique involves using cancellous autogenous bone under the mesh scaffold. More recently growth factors and bone substitutes have been utilized as autograft replacements. There are several advantages to using titanium mesh for space maintenance including strength, ease of use, low cost and biocompatibility. However, the difficulty in removing the mesh has led to a search for other space maintenance scaffolds including tenting screws, dense preshaped collagen and porous high-density polyethylene. This webinar will discuss the use of rhBMP-2 for managing horizontal and vertical bone deficiencies with various scaffolds.

Presented By:: Craig M Misch, DDS, MDS
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Credit)
Watch Now>>
Related Articles
Maintenance of Alveolar Ridge Dimensions Utilizing an Extracted Tooth Dentin Particulate Autograft and Platelet-Rich Fibrin: A Retrospective Radiographic Cone-Beam Computed Tomography Study

Maintenance of Alveolar Ridge Dimensions Utilizing an Extracted Tooth Dentin Particulate Autograft and Platelet-Rich Fibrin: A Retrospective Radiographic Cone-Beam Computed Tomography Study
This study utilized radiographic comparative analysis in order to evaluate dimensional ridge changes four months after tooth extraction and immediate grafting with mineralized dentin particulate autograft and chopped platelet-rich fibrin. Fifty-eight extraction sockets with up to 2mm of missing buccal bone in the coronal aspect compared to the lingual bone were included. Graft material was covered with either a platelet-rich fibrin membrane or collagen sponge with no effort to achieve primary closure.

Author(s): SnjeĹžana Pohl, MD, DMD;Itzhak Binderman; Jelena Tomac
View Article>>
Atrophic Posterior Maxillan and Mandible: Alveolar Ridge Reconstruction with Mandibular Block Autografts

Atrophic Posterior Maxillan and Mandible: Alveolar Ridge Reconstruction with Mandibular Block Autografts
Autogenous bone grafts have been used for many years for alveolar ridge augmentation and are still considered to be the gold standard for jaw reconstruction. The use of these grafts with osseointegrated implants was originally discussed by Brånemark et al., who used the iliac crest as the donor site. For repair of most localized alveolar defects, however, bone grafts from the mandible offer advantages over iliac crest grafts. These include the proximity of donor and recipient sites, convenient surgical access, decreased donor site morbidity and decreased cost. This article focuses on posterior maxillary and mandibular osseous augmentation in a staged approach for implant placement. Both horizontal and vertical deficiencies are addressed with the use of symphysis and ramus buccal shelf donor block bone via case presentations.

Author(s):
View Article>>
Intraoral Autogenous Block Onlay Bone Grafting for ExtensiveReconstruction of Atrophic Maxillary Alveolar Ridges

Intraoral Autogenous Block Onlay Bone Grafting for ExtensiveReconstruction of Atrophic Maxillary Alveolar Ridges
Autologous bone grafting used with dental implants was originally described by Bränemarketal in 1975, and is now a well-accepted procedure in oral and maxillofacial rehabilitation.Placement of an endosseous implant requires sufficient bone volume for complete bone coverage. Furthermore, the pattern of ridge resorption contributes to an unfavorable maxillomandibular relationship, requires angulations of the implants and/or angled abutments, and affects the proximity of adjacent facial concavities(maxillary sinus, nasal cavity) and vital structures(mandibular nerve).

Author(s): Devorah Schwartz-Arad, DMD, PhD;Liran Levin
View Article>>
Contact Us | Privacy Policy | Terms of Use
©2021

Preferred Language: English Flag
Contact Us · Login · Register